Target Line Sight Sets
Sporter Sight Sets
Sporter Sight Set (013799)
$145.00
This kit is designed to be a simple solution for those who are looking to replace worn or lost parts to their front sight.
There are two different hoods for both older and newer models, a standard front sight base, rear folding sight, two post options, screws, and extra receiver screws to fill in the drilled and tapped holes.
SKU: 013799
Sight Set Spare Parts Kits
7002 Sight Set Spare Parts Kit (014870)
$75.00
Spare parts set for rear sights 7002. Requires an Allen key size 1.5 and 2.5 for assembly.
Consisting of:
2x steel ball (004939)
2x compression spring (004491)
2x nut (004484)
4x screw 35x23.3 (004447)
1x pivot screw M3x20 (004731)
1x pivot screw M2x20 (004724)
1x pivot screw M2x16 (004722)
2x clamping piece (004449)
2x compression spring (002740)
SKU 014870
6805 Rear Sight Spare Parts Kit (014871)
$95.00
Spare parts for servicing the 6805 and 6807 rear sights. Requires hexagon socket 2.5 and 4.
Includes:
1x 004361 Elevation screw 6705-015/10
1x 004940 Height and side stop screw
1x 012802 Elevation screw spring
2x 002740 Clamping foot springs
2x 004447 clamping screw
2x 004448 Basic terminals
SKU 014871
6817 Sight Riser block set 8mm height
$85.00
With strong clamping, for prism milling from 11 to 13 mm. For an increase of 8 mm. Extremely stable clamping bars guarantee a 100% fit and are also suitable for large-caliber rifles. For all current ANSCHÜTZ KK models from year of manufacture 1988 of the 1907, 1913, 1914, 2007, 2012, 2013 and 54.30 series as well as the air rifle models 2001, 2002, 2020, 2025, 8001, 8002, 9003 and 9015, where the V-block is only milled into the barrel, this sight riser block model 6817, order no. 001064 fits. The elevation also fits all current and common sporting rifle models such as Steyr, FWB, Diana.
Question: Which sight riser block fits which ANSCHÜTZ model?
Answer: Until about 1962, the Match 54 was delivered with a shrunk-on front sight base into which the front sight (M16) was pressed laterally by means of a dovetail fit. There is no sight riser block for this version. For the KK models Match 54, 1407 to 1813, where the V-block was screwed onto the barrel to accommodate the front sight tunnel, the ANSCHÜTZ sight riser block model 6713/2, order no. 009161, fits. No. 009161.
The set 001064 is made up of the following parts if you only need one.
SKU 004450 - Long riser block only
SKU 004451 - Short riser block only
Please see the link below for Manual, Spare parts list and additional information:
https://www.anschuetz-sport.com/en/downloads/
SKU: 001064
CONTACT US!
Need help but can't find it on our website? Contact us through any of these ways! If by email, please give us up to 48 business hours to respond!
Consumer Sales
|
Service Team
|
Dealers Contact
|
Office Phone Hours: Monday - Friday, 9:00am to 4:00pm CST