Custom Shop - Sporting Rifles
The following rifles are available for immediate purchase.
Sales: 205-655-7500 or 7502
Last Update: 10/8/2019
Sales: 205-655-7500 or 7502
Last Update: 10/8/2019
** Important Note on Rifle Purchases - Required Deposit **
All direct sales will require a $500 non-refundable deposit at the time of ordering. When ordering a rifle, you will need to pay a deposit of $500 at that time. Until we have secured the deposit, the rifle will remain for sale and open to any customer.
If you change your mind for any reason, you will not get the deposit back. When you complete the deal on the rifle, the $500 will be credited to the price of the rifle.
We will not hold or reserve any rifle without this non-refundable deposit.
All direct sales will require a $500 non-refundable deposit at the time of ordering. When ordering a rifle, you will need to pay a deposit of $500 at that time. Until we have secured the deposit, the rifle will remain for sale and open to any customer.
If you change your mind for any reason, you will not get the deposit back. When you complete the deal on the rifle, the $500 will be credited to the price of the rifle.
We will not hold or reserve any rifle without this non-refundable deposit.
ANSCHÜTZ 1416 AV Sporter Classic
Price: $1550.00
For sale is a new ANSCHÜTZ 1416 sporting rifle featuring a factory 18" barrel threaded 1/2" x 28 tpi, which has been epoxy bedded into an excellent classic-styled walnut stock.
The walnut stock was then buffed out with a paste wax, and both the trigger and bolt were tuned for optimum performance. The plastic bolt knob was replaced with a blued steel knob and the action screws were upgraded to hex-keyed screws.
Upgrades
Standard Features
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
Price: $1550.00
For sale is a new ANSCHÜTZ 1416 sporting rifle featuring a factory 18" barrel threaded 1/2" x 28 tpi, which has been epoxy bedded into an excellent classic-styled walnut stock.
The walnut stock was then buffed out with a paste wax, and both the trigger and bolt were tuned for optimum performance. The plastic bolt knob was replaced with a blued steel knob and the action screws were upgraded to hex-keyed screws.
Upgrades
- Epoxy bedding of the action.
- Select walnut stock.
- Trigger sear adjusted and greased with NECO moly paste.
- Blued steel bolt knob.
- Magazine tune.
- 5-round magazine with aluminum base plate.
- Hex keyed actions screws.
Standard Features
- Caliber: .22lr
- 18" barrel threaded 1/2" x 28 tpi.
- Two-stage 5098 trigger.
- Weight: 5 lbs, 9.0 oz.
- Magazine Capacity: 5
- Reference Number: 8789
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
ANSCHÜTZ 1416 Stainless Sporter Classic
Price: $1800.00
For sale is a new ANSCHÜTZ 1416 sporting rifle featuring a 20.5" stainless steel heavy taper sporting barrel featuring a satin rushed-metal finish. In addition, the receiver has been epoxy bedded into an excellent classic-styled walnut stock.
The walnut stock was then buffed out with a paste wax, and both the trigger and bolt were tuned for optimum performance. The plastic bolt knob was replaced with a blued steel knob and the action screws were upgraded to hex-keyed screws.
Upgrades
Standard Features
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
Price: $1800.00
For sale is a new ANSCHÜTZ 1416 sporting rifle featuring a 20.5" stainless steel heavy taper sporting barrel featuring a satin rushed-metal finish. In addition, the receiver has been epoxy bedded into an excellent classic-styled walnut stock.
The walnut stock was then buffed out with a paste wax, and both the trigger and bolt were tuned for optimum performance. The plastic bolt knob was replaced with a blued steel knob and the action screws were upgraded to hex-keyed screws.
Upgrades
- Epoxy bedding of the action.
- Stainless steel barrel.
- Select walnut stock.
- Trigger sear adjusted and greased with NECO moly paste.
- Blued steel bolt knob.
- 5-round magazine with aluminum base plate.
- Hex keyed actions screws.
Standard Features
- Caliber: .22lr
- 20.5" Heavy taper stainless barrel
- Two-stage 5098 trigger
- Weight: 6 lbs, 8.0 oz.
- Magazine Capacity: 5
- Reference Number: 1512
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
ANSCHÜTZ 1416 Thumbhole 17 Mach 2
Price: $2100.00
For sale is a new ANSCHÜTZ 1416 HB featuring a 23" factory heavy barrel custom chambered in 17 Mach 2 and epoxy bedded into an excellent walnut thumbhole stock.
The receiver and barrel have been Cerakoated in satin graphite black.
The walnut stock was then buffed out with a paste wax, and both the trigger and bolt were tuned for optimum performance. The plastic bolt knob was replaced with a blued steel knob and the action screws were upgraded to hex-keyed screws.
Upgrades
Standard Features
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
Price: $2100.00
For sale is a new ANSCHÜTZ 1416 HB featuring a 23" factory heavy barrel custom chambered in 17 Mach 2 and epoxy bedded into an excellent walnut thumbhole stock.
The receiver and barrel have been Cerakoated in satin graphite black.
The walnut stock was then buffed out with a paste wax, and both the trigger and bolt were tuned for optimum performance. The plastic bolt knob was replaced with a blued steel knob and the action screws were upgraded to hex-keyed screws.
Upgrades
- Epoxy bedding of the action.
- Chambering in 17 Mach 2.
- Select walnut stock.
- Trigger sear adjusted and greased with NECO moly paste.
- Blued steel bolt knob.
- Cerakoating in graphite black.
- 5-round magazine with aluminum base plate.
- Hex keyed actions screws.
Standard Features
- Caliber: .17 Mach 2
- 23" Factory heavy barrel.
- Two-stage 5098 trigger
- Weight: 6 lbs, 6.0 oz.
- Magazine Capacity: 5
- Reference Number: 5557
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
ANSCHÜTZ 1712 Silhouette
Price: $2550.00
The new 1712 rifles featuring an interesting walnut stock and excellent bluing. The receiver is epoxy bedding into the stock for perfect alignment in the barrel channel and properly floated to the receiver face.
After bedding, the barreled action is rebuilt, the trigger upgraded to a light weight spring, safety adjusted for easier operation, the sear is re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
At this point new hex-keyed action screws are carefully measured for proper length, the bolt tuned for ideal ignition, ejection adjusted, and the bolt knob upgraded to a blued steel knob of identical size. The wood stock is buffed out with wax and then completely assembled and inspected.
The rifle is delivered with one 5-shot magazine, test target, and sling studs.
Upgrades
Specifications
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
Price: $2550.00
The new 1712 rifles featuring an interesting walnut stock and excellent bluing. The receiver is epoxy bedding into the stock for perfect alignment in the barrel channel and properly floated to the receiver face.
After bedding, the barreled action is rebuilt, the trigger upgraded to a light weight spring, safety adjusted for easier operation, the sear is re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
At this point new hex-keyed action screws are carefully measured for proper length, the bolt tuned for ideal ignition, ejection adjusted, and the bolt knob upgraded to a blued steel knob of identical size. The wood stock is buffed out with wax and then completely assembled and inspected.
The rifle is delivered with one 5-shot magazine, test target, and sling studs.
Upgrades
- Trigger & bolt tune.
- Epoxy bedded.
- Aluminum magazine base plate.
- Blued steel bolt knob, hex-keyed action screws.
Specifications
- Barrel Length: 21.5" Sporter contour
- Caliber: .22 lr
- Weight: 7.0 lbs, 3 oz.
- Trigger: 5109/2 two-stage trigger, adjusted to 18 ounces.
- Action: Bolt-action repeater with 5-shot magazine.
- # 8941 Stock Reference.
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
ANSCHÜTZ 1712 Silhouette
Price: $2550.00
The new 1712 rifles featuring a straight-grained walnut stock and excellent bluing. The receiver is epoxy bedding into the stock for perfect alignment in the barrel channel and properly floated to the receiver face.
After bedding, the barreled action is rebuilt, the trigger upgraded to a light weight spring, safety adjusted for easier operation, the sear is re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
At this point new hex-keyed action screws are carefully measured for proper length, the bolt tuned for ideal ignition, ejection adjusted, and the bolt knob upgraded to a blued steel knob of identical size. The wood stock is buffed out with wax and then completely assembled and inspected.
The rifle is delivered with one 5-shot magazine, test target, and sling studs.
Upgrades
Specifications
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
Price: $2550.00
The new 1712 rifles featuring a straight-grained walnut stock and excellent bluing. The receiver is epoxy bedding into the stock for perfect alignment in the barrel channel and properly floated to the receiver face.
After bedding, the barreled action is rebuilt, the trigger upgraded to a light weight spring, safety adjusted for easier operation, the sear is re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
At this point new hex-keyed action screws are carefully measured for proper length, the bolt tuned for ideal ignition, ejection adjusted, and the bolt knob upgraded to a blued steel knob of identical size. The wood stock is buffed out with wax and then completely assembled and inspected.
The rifle is delivered with one 5-shot magazine, test target, and sling studs.
Upgrades
- Trigger & bolt tune.
- Epoxy bedded.
- Aluminum magazine base plate.
- Blued steel bolt knob, hex-keyed action screws.
Specifications
- Barrel Length: 21.5" Sporter contour
- Caliber: .22 lr
- Weight: 7.0 lbs, 3 oz.
- Trigger: 5109/2 two-stage trigger, adjusted to 18 ounces.
- Action: Bolt-action repeater with 5-shot magazine.
- # 4896 Stock Reference.
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
ANSCHÜTZ 1416 Stainless Beavertail Sporter
Price: $1700.00
For sale is a new ANSCHÜTZ 1416 sporting rifle featuring a 21.5" stainless steel heavy taper sporting barrel, epoxy bedded into a walnut beavertail stock.
The walnut stock was then buffed out with a paste wax, and both the trigger and bolt were tuned for optimum performance. The plastic bolt knob was replaced with a blued steel knob and the action screws were upgraded to hex-keyed screws.
Upgrades
Standard Features
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
Price: $1700.00
For sale is a new ANSCHÜTZ 1416 sporting rifle featuring a 21.5" stainless steel heavy taper sporting barrel, epoxy bedded into a walnut beavertail stock.
The walnut stock was then buffed out with a paste wax, and both the trigger and bolt were tuned for optimum performance. The plastic bolt knob was replaced with a blued steel knob and the action screws were upgraded to hex-keyed screws.
Upgrades
- Epoxy bedding of the action.
- Stainless steel barrel.
- Select walnut stock.
- Trigger sear adjusted and greased with NECO moly paste.
- Blued steel bolt knob.
- 5-round magazine with aluminum base plate.
- Hex keyed actions screws.
Standard Features
- Caliber: .22lr
- 21.5" Heavy taper stainless barrel
- Two-stage 5098 trigger
- Weight: 6 lbs, 8.0 oz.
- Magazine Capacity: 5
- Reference Number: 1528
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
ANSCHÜTZ 1727-17 HMR Heavy Barrel
Price: $4300.00
For sale is a new 1727-17 sporting rifle, chambered in .17 HMR and featuring the amazing straight-pull Fortner action, factory 23" heavy barrel installed by the Custom Shop, and superb 5020 match trigger.
After the machine was complete, the barreled action, bottom metal, and receiver was cerakoated in satin black.
The receiver has been epoxy bedding into a Turkish walnut stock for perfect alignment in the barrel channel and properly floated to the receiver face. After bedding, the barreled action was rebuilt, trigger tuned, sear re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
We installed new hex-keyed action screws, as well as the new biathlon bolt handle. The wood stock was buffed out with a hard wax.
The rifle is delivered with one 5-shot magazine and sling studs.
Upgrades
Specifications
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
Price: $4300.00
For sale is a new 1727-17 sporting rifle, chambered in .17 HMR and featuring the amazing straight-pull Fortner action, factory 23" heavy barrel installed by the Custom Shop, and superb 5020 match trigger.
After the machine was complete, the barreled action, bottom metal, and receiver was cerakoated in satin black.
The receiver has been epoxy bedding into a Turkish walnut stock for perfect alignment in the barrel channel and properly floated to the receiver face. After bedding, the barreled action was rebuilt, trigger tuned, sear re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
We installed new hex-keyed action screws, as well as the new biathlon bolt handle. The wood stock was buffed out with a hard wax.
The rifle is delivered with one 5-shot magazine and sling studs.
Upgrades
- Trigger tune.
- Epoxy bedded.
- Hex-keyed action screws.
- Select wood stock.
- Aluminum base pate increasing magazine capacity to 5 rounds.
- Cerakoating in satin black.
Specifications
- Barrel Length: 23" Heavy Barrel.
- Caliber: .17 HMR
- Weight: 7 lbs, 8 oz.
- Trigger: 5020 Match two-stage trigger, adjusted to 16 ounces.
- Action: Fortner repeater.
- # 6965 Stock Reference.
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
ANSCHÜTZ 1712 AV Stainless
Price: $2850.00
The new 1712 American Varmint series rifles feature a stainless steel factory-threaded 18" barrel with a 1/2" x 28 tpi thread pitch, fitting suppressors on this side of the pond.
The receiver is epoxy bedding into the stock for perfect alignment in the barrel channel and properly floated to the receiver face.
After bedding, the barreled action is rebuilt, the trigger upgraded to a light weight spring, safety adjusted for easier operation, the sear is re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
At this point new hex-keyed action screws are carefully measured for proper length, the bolt tuned for ideal ignition, ejection adjusted, and the bolt knob upgraded to a blued steel knob of identical size. The wood stock is buffed out with wax and then completely assembled and inspected.
The rifle is delivered with one 5-shot magazine, test target, and sling studs.
Upgrades
Specifications
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
Price: $2850.00
The new 1712 American Varmint series rifles feature a stainless steel factory-threaded 18" barrel with a 1/2" x 28 tpi thread pitch, fitting suppressors on this side of the pond.
The receiver is epoxy bedding into the stock for perfect alignment in the barrel channel and properly floated to the receiver face.
After bedding, the barreled action is rebuilt, the trigger upgraded to a light weight spring, safety adjusted for easier operation, the sear is re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
At this point new hex-keyed action screws are carefully measured for proper length, the bolt tuned for ideal ignition, ejection adjusted, and the bolt knob upgraded to a blued steel knob of identical size. The wood stock is buffed out with wax and then completely assembled and inspected.
The rifle is delivered with one 5-shot magazine, test target, and sling studs.
Upgrades
- Trigger & bolt tune.
- Epoxy bedded.
- Aluminum magazine base plate.
- Blued steel bolt knob, hex-keyed action screws.
Specifications
- Barrel Length: 18" factory sporter barrel, stainless steel, threaded 1/2" x 28 tpi.
- Caliber: .22 lr
- Weight: 7.0 lbs
- Trigger: 5109/2 two-stage trigger, adjusted to 14 ounces.
- Action: Bolt-action repeater with 5-shot magazine.
- # 5505 Stock Reference.
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
ANSCHÜTZ 1712 AV
Price: $2750.00
The new 1712 American Varmint series rifles feature a factory-threaded 18" barrel with a 1/2" x 28 tpi thread pitch, fitting suppressors on this side of the pond.
The receiver is epoxy bedding into the stock for perfect alignment in the barrel channel and properly floated to the receiver face.
After bedding, the barreled action is rebuilt, the trigger upgraded to a light weight spring, safety adjusted for easier operation, the sear is re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
At this point new hex-keyed action screws are carefully measured for proper length, the bolt tuned for ideal ignition, ejection adjusted, and the bolt knob upgraded to a blued steel knob of identical size.
The wood stock is buffed out with wax and the rifle is then completely assembled and inspected. The rifle is delivered with one 5-shot magazine, test target, and sling studs.
Upgrades
Specifications
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
Price: $2750.00
The new 1712 American Varmint series rifles feature a factory-threaded 18" barrel with a 1/2" x 28 tpi thread pitch, fitting suppressors on this side of the pond.
The receiver is epoxy bedding into the stock for perfect alignment in the barrel channel and properly floated to the receiver face.
After bedding, the barreled action is rebuilt, the trigger upgraded to a light weight spring, safety adjusted for easier operation, the sear is re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
At this point new hex-keyed action screws are carefully measured for proper length, the bolt tuned for ideal ignition, ejection adjusted, and the bolt knob upgraded to a blued steel knob of identical size.
The wood stock is buffed out with wax and the rifle is then completely assembled and inspected. The rifle is delivered with one 5-shot magazine, test target, and sling studs.
Upgrades
- Trigger & bolt tune.
- Epoxy bedded.
- Aluminum base plate for magazine.
- Blued steel bolt knob, hex-keyed action screws.
Specifications
- Barrel Length: 18" factory sporter barrel, threaded 1/2" x 28 tpi.
- Caliber: .22 lr
- Weight: 7.0 lbs
- Trigger: 5109/2 two-stage trigger, adjusted to 12 ounces.
- Action: Bolt-action repeater with 5-shot magazine.
- # 4856 Stock Reference.
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
ANSCHÜTZ 1712 AV Stainless
Price: $2850.00
The new 1712 American Varmint series rifles feature a stainless steel factory-threaded 18" barrel with a 1/2" x 28 tpi thread pitch, fitting suppressors on this side of the pond.
The receiver is epoxy bedding into the stock for perfect alignment in the barrel channel and properly floated to the receiver face.
After bedding, the barreled action is rebuilt, the trigger upgraded to a light weight spring, safety adjusted for easier operation, the sear is re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
At this point new hex-keyed action screws are carefully measured for proper length, the bolt tuned for ideal ignition, ejection adjusted, and the bolt knob upgraded to a blued steel knob of identical size. The wood stock is buffed out with wax and then completely assembled and inspected. This rifle has very dark figuring in the stock, making it somewhat uncommon for our line.
The rifle is delivered with one 5-shot magazine, test target, and sling studs.
Upgrades
Specifications
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
Price: $2850.00
The new 1712 American Varmint series rifles feature a stainless steel factory-threaded 18" barrel with a 1/2" x 28 tpi thread pitch, fitting suppressors on this side of the pond.
The receiver is epoxy bedding into the stock for perfect alignment in the barrel channel and properly floated to the receiver face.
After bedding, the barreled action is rebuilt, the trigger upgraded to a light weight spring, safety adjusted for easier operation, the sear is re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
At this point new hex-keyed action screws are carefully measured for proper length, the bolt tuned for ideal ignition, ejection adjusted, and the bolt knob upgraded to a blued steel knob of identical size. The wood stock is buffed out with wax and then completely assembled and inspected. This rifle has very dark figuring in the stock, making it somewhat uncommon for our line.
The rifle is delivered with one 5-shot magazine, test target, and sling studs.
Upgrades
- Trigger & bolt tune.
- Epoxy bedded.
- Aluminum magazine base plate.
- Blued steel bolt knob, hex-keyed action screws.
Specifications
- Barrel Length: 18" factory sporter barrel, stainless steel, threaded 1/2" x 28 tpi.
- Caliber: .22 lr
- Weight: 7.0 lbs
- Trigger: 5109/2 two-stage trigger, adjusted to 12 ounces.
- Action: Bolt-action repeater with 5-shot magazine.
- # 5504 Stock Reference.
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
ANSCHÜTZ 1727-17 Sporter
Price: $4100.00
For sale is a new 1727-17 sporting rifle, chambered in .17 HMR and featuring the amazing straight-pull Fortner action, factory 22" sporter-weight barrel, and superb 5020 match trigger.
Representing the very best sporting rifle built at our factory, this excellent rifle has been further enhanced at the Custom Shop in Las Vegas starting with a complete cerakoating of the barreled action in satin black.
The receiver has been epoxy bedding into a Turkish walnut stock for perfect alignment in the barrel channel and properly floated to the receiver face. After bedding, the barreled action was rebuilt, trigger tuned, sear re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
We installed new hex-keyed action screws, as well as the new biathlon bolt handle. The wood stock was buffed out with a hard wax.
The rifle is delivered with one 5-shot magazine and sling studs.
Upgrades
Specifications
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
Price: $4100.00
For sale is a new 1727-17 sporting rifle, chambered in .17 HMR and featuring the amazing straight-pull Fortner action, factory 22" sporter-weight barrel, and superb 5020 match trigger.
Representing the very best sporting rifle built at our factory, this excellent rifle has been further enhanced at the Custom Shop in Las Vegas starting with a complete cerakoating of the barreled action in satin black.
The receiver has been epoxy bedding into a Turkish walnut stock for perfect alignment in the barrel channel and properly floated to the receiver face. After bedding, the barreled action was rebuilt, trigger tuned, sear re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
We installed new hex-keyed action screws, as well as the new biathlon bolt handle. The wood stock was buffed out with a hard wax.
The rifle is delivered with one 5-shot magazine and sling studs.
Upgrades
- Trigger tune.
- Epoxy bedded.
- Hex-keyed action screws.
- Select wood stock.
- Aluminum base pate increasing magazine capacity to 5 rounds.
- Cerakoating in satin black.
Specifications
- Barrel Length: 22" factory sporter barrel.
- Caliber: .17 HMR
- Weight: 7 lbs, 8 oz.
- Trigger: 5020 Match two-stage trigger, adjusted to 16 ounces.
- Action: Fortner repeater.
- # 0258 Stock Reference.
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
ANSCHÜTZ 1727-17 AV Sporter
Price: $4600.00
For sale is a new 1727-17 sporting rifle, chambered in .17 HMR and featuring the amazing straight-pull Fortner action, factory-threaded 18" sporter-weight barrel with a 1/2" x 28 tpi thread pitch, and superb 5020 match trigger.
Representing the very best sporting rifle built at our factory, this excellent rifle has been further enhanced at the Custom Shop in Las Vegas starting with a complete cerakoating of the barreled action in satin black.
The receiver has been epoxy bedding into a Turkish walnut stock for perfect alignment in the barrel channel and properly floated to the receiver face.
After bedding, the barreled action was rebuilt, trigger tuned, sear re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
We installed an aluminum Picatinny rail and new hex-keyed action screws, as well as the new biathlon bolt handle. The wood stock was buffed out with a hard wax.
The rifle is delivered with one 5-shot magazine and sling studs.
Upgrades
Specifications
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
Price: $4600.00
For sale is a new 1727-17 sporting rifle, chambered in .17 HMR and featuring the amazing straight-pull Fortner action, factory-threaded 18" sporter-weight barrel with a 1/2" x 28 tpi thread pitch, and superb 5020 match trigger.
Representing the very best sporting rifle built at our factory, this excellent rifle has been further enhanced at the Custom Shop in Las Vegas starting with a complete cerakoating of the barreled action in satin black.
The receiver has been epoxy bedding into a Turkish walnut stock for perfect alignment in the barrel channel and properly floated to the receiver face.
After bedding, the barreled action was rebuilt, trigger tuned, sear re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
We installed an aluminum Picatinny rail and new hex-keyed action screws, as well as the new biathlon bolt handle. The wood stock was buffed out with a hard wax.
The rifle is delivered with one 5-shot magazine and sling studs.
Upgrades
- Trigger tune.
- Epoxy bedded.
- Hex-keyed action screws.
- Select wood stock.
- Aluminum base pate increasing magazine capacity to 5 rounds.
- Cerakoating in satin black.
- Aluminum picatinny rail.
Specifications
- Barrel Length: 18" factory sporter barrel, threaded 1/2" x 28 tpi.
- Caliber: .17 HMR
- Weight: 7.5 lbs
- Trigger: 5020 Match two-stage trigger, adjusted to 12 ounces.
- Action: Fortner repeater.
- # 6959 Stock Reference.
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
ANSCHÜTZ 1727-17 AV Sporter
Price: $4600.00
For sale is a new 1727-17 sporting rifle, chambered in .17 HMR and featuring the amazing straight-pull Fortner action, factory-threaded 18" sporter-weight barrel with a 1/2" x 28 tpi thread pitch, and superb 5020 match trigger.
Representing the very best sporting rifle built at our factory, this excellent rifle has been further enhanced at the Custom Shop in Las Vegas starting with a complete graphite black, textured cerakoating of the barreled action.
The receiver has been epoxy bedding into a Turkish walnut stock for perfect alignment in the barrel channel and properly floated to the receiver face.
After bedding, the barreled action was rebuilt, trigger tuned, sear re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
We installed an aluminum Picatinny rail and new hex-keyed action screws, as well as the new biathlon bolt handle. The wood stock was buffed out with a hard wax.
The rifle is delivered with one 5-shot magazine and sling studs.
Upgrades
Specifications
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
Price: $4600.00
For sale is a new 1727-17 sporting rifle, chambered in .17 HMR and featuring the amazing straight-pull Fortner action, factory-threaded 18" sporter-weight barrel with a 1/2" x 28 tpi thread pitch, and superb 5020 match trigger.
Representing the very best sporting rifle built at our factory, this excellent rifle has been further enhanced at the Custom Shop in Las Vegas starting with a complete graphite black, textured cerakoating of the barreled action.
The receiver has been epoxy bedding into a Turkish walnut stock for perfect alignment in the barrel channel and properly floated to the receiver face.
After bedding, the barreled action was rebuilt, trigger tuned, sear re-greased with Neco moly-paste, and the ejector tab beveled to protect cleaning rods.
We installed an aluminum Picatinny rail and new hex-keyed action screws, as well as the new biathlon bolt handle. The wood stock was buffed out with a hard wax.
The rifle is delivered with one 5-shot magazine and sling studs.
Upgrades
- Trigger tune.
- Epoxy bedded.
- Hex-keyed action screws.
- Select wood stock.
- Aluminum base pate increasing magazine capacity to 5 rounds.
- Cerakoating in satin black.
- Aluminum picatinny rail.
Specifications
- Barrel Length: 18" factory sporter barrel, threaded 1/2" x 28 tpi.
- Caliber: .17 HMR
- Weight: 7.5 lbs
- Trigger: 5020 Match two-stage trigger, adjusted to 12 ounces.
- Action: Fortner repeater.
- # 7999 Stock Reference.
This rifle comes as NIB from the factory, carries full warranty, and is accompanied by a signed certificate.
