GRS Sporter Varmint

---

The GRS Sporter / Varmint rifle stock is tailor made for competition shooting as well as varmint hunting.  We found this stock to be most comfortable when shooting from the prone position with bipod attached.   When paired with the 18" threaded 1712, it is extremely versatile out in the field.

Features

• A full and lowered forend gives a good grip and helps improve the standing shooting position.
• The grip has a six degree angle to the side to aid the shooter to an ergonomically correct position.
• The comb and the recoil pad can be easily adjusted with push buttons - the Speed Lock system.
• Both the comb and recoil pad can be fully removed.

This unique system allows you to quickly adjust the length and height of the stock between shooting positions; no tools needed!  At the lowest comb position any bolt can be safely removed from the barreled action.

GRS Sporter Varmint Stock Specs

Specification

• Oiled finish
• 0.5" GRS Limbsaver Airtech recoil pad
• Birch Laminate
• GRS SpeedLock adjustment
• Length of Pull : 13.19 in - 14.37 in (33.5 cm - 36.5 cm)
• Total length : 29.92 in (76 cm)
• Forend width : 2.08 in (53 mm)
• Adjustment on Length of Pull and cheek-piece : 1.18 in (30 mm)
• Weight : 3.042 lb (1380 grams) (+/- 10%, depending on weapon inlet)
• Varmint barrel contour

GRS Hybrid Stock

---

The GRS Hybrid design is derived from the GRS long-range stock, with the same grip and SpeedLock system.  The butt has a flat surface specially made for shooting with a rear bag, and this is the absolute best way to shoot accurate on extended ranges.

For shooters wanting a great stock to shoot from the bench with a front and rear rest, or in the field, this is the perfect stock. 

During our testing, the rifle rides exceedingly well in the bags.  We used a wide rear bag to fit the stock perfectly.

Features

• The forend is 2" longer than a sporter/varmint style stock and has a flat bottom for smooth tracing on front rests. 
• Longer forend provides a better mounting position for bipods and aids in balancing long and heavy barrels.
• One sling mount is provided for using a Harris style bipod.
• The butt of the stock has a small flat section at the bottom, tapering from 3/4" to 1" and parallel to the forend.

GRS Hyrbid Stock Specs

GRS Hybid Stock Specifications


Oiled finish
0.5" Limbsaver/GRS recoil pad
Birch Laminate - Black
Speed Lock adjustment
LOP 13.7" - 14.9"
Total length 38.5"
Forend width 2.3"
1.18" adjustment LOP and cheekpiece
Height adjustable recoilpad included
Weight: 4 lbs, 2 oz
Glass bedding recommended